Test plan review for pattern: combobox-autocomplete-both-updated (76 tests)

Filter tests by assistive technology

Test 1: Navigate forwards to an empty, collapsed combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link before the Combobox

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Down Arrow) multiple times to hear all information relating to the combobox. using the following commands:
    • F
    • E
    • C
    • Tab
    • Down Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link before the Combobox

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Down Arrow) multiple times to hear all information relating to the combobox. using the following commands:
    • F
    • E
    • C
    • Tab
    • Down Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 2: Navigate backwards to an empty, collapsed combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link after the Combobox

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Up Arrow) multiple times to hear all information relating to the combobox. using the following commands:
    • Shift+F
    • Shift+E
    • Shift+C
    • Shift+Tab
    • Up Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link after the Combobox

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Up Arrow) multiple times to hear all information relating to the combobox. using the following commands:
    • Shift+F
    • Shift+E
    • Shift+C
    • Shift+Tab
    • Up Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 3: Navigate forwards to an empty, collapsed combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link before the Combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. using the following commands:
    • Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link before the Combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. using the following commands:
    • Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 4: Navigate backwards to an empty, collapsed combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link after the Combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. using the following commands:
    • Shift+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link after the Combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. using the following commands:
    • Shift+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 5: Navigate forwards to an empty, collapsed combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link before the Combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Control+Option+Right) multiple times to hear all information relating to the combobox. using the following commands:
    • Control+Option+Right
    • Tab
    • Control+Option+Command+J

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 6: Navigate backwards to an empty, collapsed combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link after the Combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Control+Option+Left) multiple times to hear all information relating to the combobox. using the following commands:
    • Ctrl+Option+Left
    • Shift+Tab
    • Shift+Control+Option+Command+J

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 7: Read information about an empty, collapsed combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the Combobox

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. With the reading cursor on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab
    • Insert+Up

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the Combobox

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. With the reading cursor on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab
    • Insert+Up

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 8: Read information about an empty, collapsed combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the Combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the Combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 9: Read information about an empty, collapsed combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the Combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Control+Option+F3
    • Control+Option+F4

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 10: Navigate forwards to a filled in, collapsed combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link before the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Down Arrow) multiple times to hear all information relating to the combobox. using the following commands:
    • F
    • E
    • C
    • Tab
    • Down Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link before the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Down Arrow) multiple times to hear all information relating to the combobox. using the following commands:
    • F
    • E
    • C
    • Tab
    • Down Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 11: Navigate backwards to a filled in, collapsed combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link after the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Up Arrow) multiple times to hear all information relating to the combobox. using the following commands:
    • Shift+F
    • Shift+E
    • Shift+C
    • Shift+Tab
    • Up Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link after the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Up Arrow) multiple times to hear all information relating to the combobox. using the following commands:
    • Shift+F
    • Shift+E
    • Shift+C
    • Shift+Tab
    • Up Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 12: Navigate forwards to a filled in, collapsed combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link before the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. using the following commands:
    • Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link before the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. using the following commands:
    • Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 13: Navigate backwards to a filled in, collapsed combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link after the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. using the following commands:
    • Shift+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link after the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. using the following commands:
    • Shift+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 14: Navigate forwards to a filled in, collapsed combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link before the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Control+Option+Right) multiple times to hear all information relating to the combobox. using the following commands:
    • Control+Option+Right
    • Tab
    • Control+Option+Command+J

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 15: Navigate backwards to a filled in, collapsed combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on a link after the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. Navigate to the Combobox. Note: it should be in the collapsed state. You may need to press certain commands (such as Control+Option+Left) multiple times to hear all information relating to the combobox. using the following commands:
    • Ctrl+Option+Left
    • Shift+Tab
    • Shift+Control+Option+Command+J

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 16: Read information about a filled in, collapsed combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. With the reading cursor on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab
    • Insert+Up

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. With the reading cursor on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab
    • Insert+Up

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 17: Read information about a filled in, collapsed combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 18: Read information about a filled in, collapsed combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Control+Option+F3
    • Control+Option+F4

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 19: Open an empty, collapsed combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. With the reading cursor on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • Alt+Down
    • Alt+Up

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. With the reading cursor on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • Alt+Down
    • Alt+Up

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed

Test 20: Open an empty, collapsed combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • Alt+Down
    • Alt+Up

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • Alt+Down
    • Alt+Up

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed

Test 21: Open an empty, collapsed combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • Option+Down
    • Option+Up

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed

Test 22: Open a filled in, collapsed combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. With the reading cursor on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • Alt+Down
    • Alt+Up

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. With the reading cursor on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • Alt+Down
    • Alt+Up

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed

Test 23: Open a filled in, collapsed combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • Alt+Down
    • Alt+Up

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • Alt+Down
    • Alt+Up

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed

Test 24: Open a filled in, collapsed combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • Option+Down
    • Option+Up

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed

Test 25: Open an empty, collapsed combobox by typing a character in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • A

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • A

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

Test 26: Open an empty, collapsed combobox by typing a character

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • A

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

Test 27: Open a filled in, collapsed combobox by typing a character in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • L

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • L

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

Test 28: Open a filled in, collapsed combobox by typing a character

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, open the combobox without moving into the listbox popup. using the following commands:
    • L

Assertions

PriorityAssertion
requiredChange in state (to expanded) is conveyed
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

Test 29: Read information about an empty, expanded combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the Combobox

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. With the reading cursor on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab
    • Insert+Up

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the Combobox

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. With the reading cursor on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab
    • Insert+Up

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 30: Read information about an empty, expanded combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the Combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the Combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 31: Read information about an empty, expanded combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the Combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Control+Option+F3
    • Control+Option+F4

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 32: Read information about a filled in, expanded combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. With the reading cursor on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab
    • Insert+Up

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. With the reading cursor on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab
    • Insert+Up

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 33: Read information about a filled in, expanded combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Insert+Tab

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 34: Read information about a filled in, expanded combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the Combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, read information about the combobox. using the following commands:
    • Control+Option+F3
    • Control+Option+F4

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredState of the text in the input (selected) is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 35: Narrow down the matching options in an empty, expanded combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, type a character to narrow down the number of matching options in the listbox popup. using the following commands:
    • A

Assertions

PriorityAssertion
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, type a character to narrow down the number of matching options in the listbox popup. using the following commands:
    • A

Assertions

PriorityAssertion
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

Test 36: Narrow down the matching options in an empty, expanded combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, type a character to narrow down the number of matching options in the listbox popup. using the following commands:
    • A

Assertions

PriorityAssertion
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

Test 37: Narrow down the matching options in a filled in, expanded combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, sets the combobox value to 'a', and de-selects all text in the input

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, type a character to narrow down the number of matching options in the listbox popup. using the following commands:
    • L

Assertions

PriorityAssertion
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, sets the combobox value to 'a', and de-selects all text in the input

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, type a character to narrow down the number of matching options in the listbox popup. using the following commands:
    • L

Assertions

PriorityAssertion
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

Test 38: Narrow down the matching options in a filled in, expanded combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, sets the combobox value to 'a', and de-selects all text in the input

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, type a character to narrow down the number of matching options in the listbox popup. using the following commands:
    • L

Assertions

PriorityAssertion
requiredText of the automatically completed option ('Alabama') is conveyed
requiredState of the text in the input (selected) is conveyed

Test 39: Close an empty combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. With the reading cursor on the combobox, close the combobox. using the following commands:
    • Escape

Assertions

PriorityAssertion
requiredChange in state (to collapsed) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. With the reading cursor on the combobox, close the combobox. using the following commands:
    • Escape

Assertions

PriorityAssertion
requiredChange in state (to collapsed) is conveyed

Test 40: Close an empty combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, close the combobox. using the following commands:
    • Enter
    • Escape

Assertions

PriorityAssertion
requiredChange in state (to collapsed) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, close the combobox. using the following commands:
    • Enter
    • Escape

Assertions

PriorityAssertion
requiredChange in state (to collapsed) is conveyed

Test 41: Close an empty combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, close the combobox. using the following commands:
    • Enter
    • Escape

Assertions

PriorityAssertion
requiredChange in state (to collapsed) is conveyed

Test 42: Close a filled in combobox in reading mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the Virtual Cursor is active by pressing Alt+Delete. If it is not, turn on the Virtual Cursor by pressing Insert+Z.
  2. With the reading cursor on the combobox, close the combobox. using the following commands:
    • Escape

Assertions

PriorityAssertion
requiredChange in state (to collapsed) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Insure NVDA is in browse mode by pressing Escape. Note: This command has no effect if NVDA is already in browse mode.
  2. With the reading cursor on the combobox, close the combobox. using the following commands:
    • Escape

Assertions

PriorityAssertion
requiredChange in state (to collapsed) is conveyed

Test 43: Close a filled in combobox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, close the combobox. using the following commands:
    • Enter
    • Escape

Assertions

PriorityAssertion
requiredChange in state (to collapsed) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, close the combobox. using the following commands:
    • Enter
    • Escape

Assertions

PriorityAssertion
requiredChange in state (to collapsed) is conveyed

Test 44: Close a filled in combobox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'Alabama'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, close the combobox. using the following commands:
    • Enter
    • Escape

Assertions

PriorityAssertion
requiredChange in state (to collapsed) is conveyed

Test 45: Navigate from an empty, collapsed combobox to the first option in a listbox popup in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, open the combobox and navigate to the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, open the combobox and navigate to the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 46: Navigate from an empty, collapsed combobox to the first option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, open the combobox and navigate to the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 47: Navigate from an empty, collapsed combobox to the last option in a listbox popup in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, open the combobox and navigate to the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Wyoming') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (56) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, open the combobox and navigate to the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Wyoming') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (56) is conveyed

Test 48: Navigate from an empty, collapsed combobox to the last option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, open the combobox and navigate to the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Wyoming') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (56) is conveyed

Test 49: Navigate from a filled in, collapsed combobox to the first option in a listbox popup in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, open the combobox and navigate to the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (5) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, open the combobox and navigate to the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (5) is conveyed

Test 50: Navigate from a filled in, collapsed combobox to the first option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, open the combobox and navigate to the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (5) is conveyed

Test 51: Navigate from a filled in, collapsed combobox to the last option in a listbox popup interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, open the combobox and navigate to the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Arkansas') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (5) is conveyed
requiredNumber of options in the popup (5) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, open the combobox and navigate to the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Arkansas') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (5) is conveyed
requiredNumber of options in the popup (5) is conveyed

Test 52: Navigate from a filled in, collapsed combobox to the last option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, open the combobox and navigate to the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Arkansas') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (5) is conveyed
requiredNumber of options in the popup (5) is conveyed

Test 53: Navigate from an empty, expanded combobox to the first option in a listbox popup in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, navigate to the the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, navigate to the the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 54: Navigate from an empty, expanded combobox to the first option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, navigate to the the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 55: Navigate from an empty, expanded combobox to the last option in a listbox popup in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, navigate to the the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Wyoming') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (56) is conveyed
requiredNumber of options in the popup (56) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, navigate to the the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Wyoming') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (56) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 56: Navigate from an empty, expanded combobox to the last option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, navigate to the the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Wyoming') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (56) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 57: Navigate from a filled in, expanded combobox to the first option in a listbox popup in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, navigate to the the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (5) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, navigate to the the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (5) is conveyed

Test 58: Navigate from a filled in, expanded combobox to the first option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, navigate to the the first option in the listbox popup. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (5) is conveyed

Test 59: Navigate from a filled in, expanded combobox to the last option in a listbox popup interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on the combobox, navigate to the the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Arkansas') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (5) is conveyed
requiredNumber of options in the popup (5) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on the combobox, navigate to the the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Arkansas') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (5) is conveyed
requiredNumber of options in the popup (5) is conveyed

Test 60: Navigate from a filled in, expanded combobox to the last option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. sets focus on and expands the combobox, and sets the combobox value to 'a'

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on the combobox, navigate to the the last option in the listbox popup. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Arkansas') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (5) is conveyed
requiredNumber of options in the popup (5) is conveyed

Test 61: Navigate to the next option in a listbox popup in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama' and places focus on that option in the listbox popup

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on an option in the listbox popup, navigate forwards to the next option. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alaska') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (2) is conveyed
requiredNumber of options in the popup (56) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama' and places focus on that option in the listbox popup

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on an option in the listbox popup, navigate forwards to the next option. using the following commands:
    • Down Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alaska') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (2) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 62: Navigate to the next option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama' and places focus on that option in the listbox popup

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on an option in the listbox popup, navigate forwards to the next option. using the following commands:
    • Control+Option+Right
    • Down Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alaska') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (2) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 63: Navigate to the previous option in a listbox popup in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alaska' and places focus on that option in the listbox popup

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on an option in the listbox popup, navigate backwards to the previous option. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alaska' and places focus on that option in the listbox popup

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on an option in the listbox popup, navigate backwards to the previous option. using the following commands:
    • Up Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 64: Navigate to the previous option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alaska' and places focus on that option in the listbox popup

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on an option in the listbox popup, navigate backwards to the previous option. using the following commands:
    • Ctrl+Option+Left
    • Up Arrow

Assertions

PriorityAssertion
requiredState of the combobox (expanded) is conveyed
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 65: Read information about a listbox popup in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, and places focus on the first option in the listbox popup

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on an option in the listbox popup, read information about the listbox popup. using the following commands:
    • Insert+Tab

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, and places focus on the first option in the listbox popup

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on an option in the listbox popup, read information about the listbox popup. using the following commands:
    • Insert+Tab

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 66: Read information about a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, and places focus on the first option in the listbox popup

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on an option in the listbox popup, read information about the listbox popup. using the following commands:
    • Control+Option+F3
    • Control+Option+F4

Assertions

PriorityAssertion
requiredRole of the popup ('listbox') is conveyed
requiredName of the popup ('States') is conveyed
requiredText of the focused option in the popup ('Alabama') is conveyed
optionalState of the focused option in the popup (selected) is conveyed
requiredPosition of the focused option in the popup (1) is conveyed
requiredNumber of options in the popup (56) is conveyed

Test 67: Navigate out of a listbox popup by moving the editing cursor to the right in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the beginning of the textbox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the right. using the following commands:
    • Right Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (on the character 'l') is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the beginning of the textbox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the right. using the following commands:
    • Right Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (on the character 'l') is conveyed

Test 68: Navigate out of a listbox popup by moving the editing cursor to the left in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the end of the textbox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the left. using the following commands:
    • Left Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (on the character 'a') is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the end of the textbox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the left. using the following commands:
    • Left Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (on the character 'a') is conveyed

Test 69: Navigate out of a listbox popup by moving the editing cursor to the right

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the beginning of the textbox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on an option in the listbox popupwith focus on the listbox popup, navigate back to the textbox by moving the editing cursor to the right. using the following commands:
    • Right Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (on the character 'l') is conveyed

Test 70: Navigate out of a listbox popup by moving the editing cursor to the left

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the end of the textbox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the left. using the following commands:
    • Left Arrow

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (on the character 'a') is conveyed

Test 71: Navigate out of a listbox popup by moving the editing cursor to the end of the textbox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the beginning of the textbox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the end of the text. using the following commands:
    • End

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (at the end of the textbox) is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the beginning of the textbox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the end of the text. using the following commands:
    • End

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (at the end of the textbox) is conveyed

Test 72: Navigate out of a listbox popup by moving the editing cursor to the beginning of the textbox in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the end of the textbox

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the beginning of the text. using the following commands:
    • Home

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (on the character 'a') is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the end of the textbox

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the beginning of the text. using the following commands:
    • Home

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (on the character 'a') is conveyed

Test 73: Navigate out of a listbox popup by moving the editing cursor to the end of the textbox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the beginning of the textbox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the end of the text. using the following commands:
    • End

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (at the end of the textbox) is conveyed

Test 74: Navigate out of a listbox popup by moving the editing cursor to the beginning of the textbox

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the combobox, sets the combobox value to 'Alabama', places focus on that option in the listbox popup and positions the editing cursor at the end of the textbox

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on an option in the listbox popup, navigate back to the textbox by moving the editing cursor to the beginning of the text. using the following commands:
    • Home

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (expanded) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed
requiredCursor position (on the character 'a') is conveyed

Test 75: Select an option in a listbox popup in interaction mode

JAWS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the Combobox and places focus on 'Alabama' in the listbox popup

Tester Instructions

  1. Verify the PC Cursor is active by pressing Alt+Delete. If it is not, turn off the Virtual Cursor by pressing Insert+Z.
  2. With focus on an option in the listbox popup, select the focused option. using the following commands:
    • Enter
    • Escape

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

NVDA

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the Combobox and places focus on 'Alabama' in the listbox popup

Tester Instructions

  1. If NVDA did not make the focus mode sound when the test page loaded, press Insert+Space to turn focus mode on.
  2. With focus on an option in the listbox popup, select the focused option. using the following commands:
    • Enter
    • Escape

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed

Test 76: Select an option in a listbox popup

VoiceOver for macOS

Scripted Instructions

The following instructions are executed by a script in the test page to initialize the widget:
  1. expands the Combobox and places focus on 'Alabama' in the listbox popup

Tester Instructions

  1. Toggle Quick Nav OFF by pressing the Left Arrow and Right Arrow keys at the same time.
  2. With focus on an option in the listbox popup, select the focused option. using the following commands:
    • Control+Option+Space
    • Enter
    • Escape

Assertions

PriorityAssertion
requiredRole 'combobox' is conveyed
requiredName of the combobox ('State') is conveyed
requiredState of the combobox (collapsed) is conveyed
requiredText of the selected option ('Alabama') is conveyed
requiredThe ability to enter or edit text is conveyed
requiredThe presence of autocomplete behavior is conveyed